Husqvarna 520iLX Manuel D'utilisation page 3

Masquer les pouces Voir aussi pour 520iLX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 244
9. Cord
10. Battery charger
11. Operator's manual
12. Handle adjustment
13. Battery indicator button
14. Battery status
15. Warning indicator (error LED)
16. Rotation direction button
17. SavE button
18. Start and stop button
19. Power on and warning indicator (error LED)
20. Battery release buttons
21. 4 mm hex key
Symbols on the product
WARNING! This product can be
dangerous! Careless or incorrect use can
result in serious injury to the operator or
others. It is very important that you read
and understand the contents of the
operator's manual. Please read the
operator's manual carefully and make
sure you understand the instructions
before the product is used.
Use approved eye protection.
Maximum speed of the output shaft.
/min
The product agrees with the applicable
EC directives.
Keep a minimum distance of 15 m to
persons and animals during operation of
the product.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Risk of blade thrust if the cutting
equipment touches an object that it does
not immediately cut. The product can cut
off body parts. Keep a minimum of 15 m
distance to persons and animals during
operation of the product.
756 - 007 -
Symbols on the product or its packaging
indicate that this product cannot be
handled as domestic waste. This product
must be deposited at an appropriate
recycling facility.
The product can cause objects to eject,
which can cause injury.
Use flexible cutting wire as trimmer line.
Do not use metal cutting elements.
The arrows show the limit for the handle
position.
Protected against splashing water.
Direct current.
Noise emissions to the environment
according to European Directive
2000/14/EC and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". Noise emission data can be found
on the machine label and in the Technical
data chapter.
yyyywwxxxx
The rating plate shows the serial
number. yyyy is the production year,
ww is the production week.
Symbols on the battery and/or on the
battery charger
Fail-safe transformer.
Recycle this product at a recy-
cling station for electrical and
electronic equipment. (Applies
to Europe only)
3

Publicité

Table des Matières
loading

Table des Matières