Proper Use; Technical Data - EINHELL GE-LC 18 Li T Mode D'emploi D'origine

•
Chain saw mounting kit
•
Cutter bar
•
Saw chain
•
Cutter guard
•
Battery pack (not included in delivery with
Art. No. 34.108.00, 34.108.10)
•
Charging unit (not included in delivery with
Art. No. 34.108.00, 34.108.10 )
•
Original operating instructions
•
Safety instructions

3. Proper use

Pole-mounted pruner (chainsaw with
telescopic handle)
The chain saw mounting kit is allowed to be used
only on the supplied motor head.
The chainsaw with telescopic handle is designed
for lopping off tree branches. It is not suitable for
extensive sawing work, felling trees or sawing any
materials other than wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Cutter bar length: ................................... 200 mm
Max. cutting length: ................................ 170 mm
Chain pitch: .................................... 3/8", 33 teeth
Chain thickness: ......................... (0.050") 1.3 mm
Sprocket wheel: ............................... 6 teeth, 3/8"
Cutting speed
at rated rpm: ...........................................3.76 m/s
Oil tank capacity: ................................... 125 cm3
Net weight without accessories: .................3.4 kg
Saw chain: ...............................Oregon 91P033X
Cutter bar: ........ Oregon 080NDEA041 (520089)
Protection class: ................................................III
Anl_GE_LC_18_Li_T_SPK7.indb 23 Anl_GE_LC_18_Li_T_SPK7.indb 23
GB
Lithium-ion battery
Voltage: .................................................. 18 V DC
Capacity: ................................................... 3.0 Ah
Charging time: ............................................. 1.0 h
Charging unit
Input voltage: .....................200-260 V ~ 50-60 Hz
Power rating: .............................................. 72 W
Output voltage: .................................. 10-21 V DC
Output current: ............................................... 3 A
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
L sound pressure level ................... 81.05 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
LWA sound power level measured .. 98.23 dB(A)
K uncertainty ............................................. 3 dB
WA
LWA sound power level guaranteed ... 102 dB(A)
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with ISO 22867.
Handle under load
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
- 23 -
= 0.947 m/s
2
h
2
11.08.14 13:08 11.08.14 13:08