Getting Started; Instructions For Initial Switch-On - BORETTI BPSN 45 Notice D'emploi

Instructions for initial switch-on

Once the oven has been connected to the power supply for
the first time, the control automatically prepares for setting a
number of user settings, which remain stored in case of any
subsequent switch-on.
NOTE: Both at the first and subsequent connections to the
power supply, the door lock mechanism performs a
calibration run - in this phase, always keep the door
closed.
• Language
• Temperature & Weight
• Time
• Date
Refer to the USER SETTING paragraph for setting instructions.
After making the user settings, the control moves automatically
to the "Standby" display page.

7 - Getting Started

EN
9