Beurer BM 51 easyClip Mode D'emploi page 22

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36
• The easyClip cuff included in delivery is only intended for
use in combination with the BM 51 easyClip blood pressure
monitor from Beurer. Do not use the cuff for other blood
pressure monitors.
• Only use the device on people that have the upper arm
circumference specified for the device.
• Please note that during inflation, the functions of the limb
in question may be impaired.
• During the blood pressure measurement, the blood circulation
must not be stopped for an unnecessarily long time. If the
device malfunctions remove the cuff from the arm.
• Avoid any mechanical restriction, compression or bending
of the cuff line.
• Do not allow sustained pressure in the cuff or frequent
measurements. The resulting restriction of the blood flow
may cause injury.
• Make sure that the cuff is not placed on an arm in which
the arteries or veins are undergoing medical treatment,
e.g. intravascular access or intravascular therapy, or an
arteriovenous (AV) shunt.
• Do not use the cuff on people who have undergone a
mastectomy.
• Do not place the cuff over wounds as this may cause further
injury.
• Place the cuff on the upper arm only. Do not place the cuff
on other parts of the body.
• You can either use the blood pressure monitor with batteries
or with the supplied mains part. Please note that data
storage is only possible when your blood pressure monitor
is supplied with power. As soon as the batteries are empty
or the mains part is disconnected from the power supply,
the blood pressure monitor loses the date and time.
• To conserve the batteries, the blood pressure monitor
switches off automatically if you do not press any buttons
for 1 minute.
• The device is only intended for the purpose described in
these instructions for use. The manufacturer is not liable
for damage resulting from improper or incorrect use.
Notes on storage
• The blood pressure monitor is made from precision and
electronic components. The accuracy of the measured values
and service life of the device depend on its careful handling:
– Protect the device from impacts, humidity, dirt, marked
temperature fluctuations and direct sunlight.
– Do not drop the device.
– Do not use the device in the vicinity of strong
electromagnetic fields and keep it away from radio systems
or mobile telephones.
– Only use the cuff included with the delivery or original
replacement cuffs. Otherwise incorrect measured values
will be recorded.
• We recommend that the batteries be removed if the device
is not to be used for a prolonged period of time.
22

Publicité

Table des Matières
loading

Table des Matières