System Connections; Connecting Antennas - Teac AG-980 Manuel Du Propriétaire

Masquer les pouces Voir aussi pour AG-980:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25

System Connections

• Do not plug the AC input cord into the wall AC outlet until all connections are completed.
• Be sure to connect the white RCA pin cords to the L (left) and the red RCA pin cords to the R (right) jacks when making audio
connections.
• Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the receiver.
1
2
.
1

CONNECTING ANTENNAs

3 6
7
4
4
• Change the position of the FM indoor antenna until you
get the best reception of your favorite FM stations.
• A 75Ω outdoor FM antenna may be used to further
improve the reception. Disconnect the indoor antenna
before replacing it with the outdoor one.
• Place the AM loop antenna as far as possible from the
receiver, TV set, speaker cords and the AC input cord and
set it to a direction for the best reception.
• If the reception is poor with the AM loop antenna, an AM
outdoor antenna can be used in place of the AM loop
antenna.
5

Publicité

Table des Matières
loading

Table des Matières