Switching The Alarm Function On/Off; Switching Off The Alarm Clock After The Alarm Sounds; Setting The Snooze Function; General Audio Playback Functions - Sonoro SO-320 Mode D'emploi

3. Press the click wheel or the [OK] button on the
remote control to confirm your setting.
 The alarm light is programmed.
If you would also like to be woken with an alarm light,
the light is switched on before the alarm goes off at
the time you have set to ensure that it has reached
the specified brightness when the alarm goes off.
To set the alarm light

'Setting alarm light' on page 95.
Example
Settings made:
 Alarm time: 07:00 a.m.
 Brightness: 15
 Timeframe: 30 min
At 06:30 a.m., the alarm light is switched on and the
brightness is increased gradually from level 0 to level
15 by 07:00 a.m.
9.6

Switching the alarm function on/off

Switching the alarm function on
1. To switch on the alarm clock, briefly press the
[Alarm 1] or [Alarm 2] button on the front of the
device or the remote control.
Switching the alarm function off
2. To switch off the alarm clock, briefly press the
[Alarm 1] or [Alarm 2] button again.
9.7 Switching off the alarm clock after
the alarm sounds
1.
To switch off the alarm, press one of the fol-
lowing buttons:
 [Alarm 1]
 [Alarm 2]
 Click wheel
 [Standby]
 The alarm will remain activated for the next
day. This does not apply if the non-recurring
alarm setting is in use. The alarm light
remains on and retains its current bright-
ness.
i
After 60 min, the alarm is switched off
automatically.
100
2.
Press the [Light] button to switch the alarm light
off.
3.
To switch the alarm clock off and have it come
back on after a set period of time (Snooze),
press the [SNOOZE] button on the remote con-
trol.
i
Alternatively, you can turn the click wheel
when the alarm sounds to set the snooze
time. Press the click wheel to confirm.
 The remaining snooze time is displayed.
After the set time expires, the alarm will
sound again.

9.8 Setting the Snooze function

Fig. 33: Setting the snooze function
1.
Briefly press the [SNOOZE] button on the
remote control in Standby mode. If the device is
switched on, press and hold the [SNOOZE]
button on the remote control until the Snooze
sub-menu appears (Fig. 33).
 The display shows the [Snooze] symbol
(Fig. 33/1).
2.
Turn the click wheel to set the duration.
3. Press the click wheel to confirm the entry.
10 General audio playback func-
tions
10.1

Selecting a playback mode

Select the desired mode for audio playback of the dif-
ferent media or from external devices.
Fig. 34: Selecting a playback mode
1. Switch on the sonoroSTEREO 2.