Olympia A230 Plus Mode D'emploi page 23

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
Laminator
Clearing Pouch Jams
If you inadvertently feed the laminating pouch into the laminator at an angle, or if
the rollers are soiled with too much residual adhesive, or if you try to laminate un­
suitable materials, laminating pouches can jam inside the laminator.
Use the Jam Release function to quickly clear a pouch jam.
1. Switch the On/Off switch to OFF. The POWER and READY indicator lamps go
out.
2. Press and hold the Jam Release lever on the rear of the machine to the left.
This releases the laminating pouch.
CAUTION!
• Danger of burns due to hot machine surface!
During hot laminating, the machine surface heats up.
Do not touch the machine surface during laminating operation.
CAUTION!
• Danger of burns due to hot laminating pouch!
When ejected after hot laminating, the laminating pouch is very hot.
Take particular care when removing the hot laminating pouch.
3. Carefully pull the laminating pouch out of the feed side of the laminator.
After a foil jam, always clean the laminator. Clean the laminator as de­
scribed in the section Regular Maintenance and Service.
Laminator / 4-in-1 Set A 230 Plus / A330 Plus
Laminator
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A330 plus

Table des Matières