Advanced - Urmet 1080P Série Manuel D'utilisation

4. Log
Click【System】→【Log】to enter the following interface：
Log Type：（system log, parameter log,record log, user log, alarm log, exeption log, storage log, all log）,
totally 5 types for selection. Set the begin time and end time of the searched log.
Click "Search" and the corresponding log information will be displayed below;
8.2.5

ADVANCED

It includes【Firmware Update】and【Load Default】, as shown in the following picture.
1. Firmware Update
Click【Advanced】→【Firmware Update】to enter the following interface :
In "Firmware Update" option, user may click "Scan" to select update file, click Upgrade button and the system will be
upgraded automatically. If the upgrade file does not match the device, the update will fail.
Note：It will take about 5 minutes to update the firmware. Do not cut off power or network during updating.
2. Load Default
Click【Advanced】→【Load Default】to enter the following interface：
58 DS1093-176