Introduction; Product Description; Technical Features; Opening The Box - Urmet 1080P Série Manuel D'utilisation

1

INTRODUCTION

Thank you for using IP Camera series products. Please carefully read the user manual before operation. As the software may
be updated at any time, the contents of the operation manual are subject to change without prior notice.
Note：
IP Camera refers to Internet Protocol Camera.
Single click：Click with the left mouse button.
Double click: Click twice with the left mouse button.
Default IP address of IP Camera：192.168.1.168
IP Camera default Username：admin（lower case）, Password：admin（lower case）
Default web port：80，Default media port：6066 and command port 6060
Do not connect more then a IP Camera in the same sub-net, it could cause an IP Address conflict in the Network.
The contents in the manual may be different from your current version. If you encounter any unsolved problem
during operation, please contact Urmet technical support department. The manual will be updated irregularly without
prior notice.
2

PRODUCT DESCRIPTION

URMET S.p.A. Ref. 1093/139M2, Ref. 1093/141M2, Ref. 1093/142M2, Ref. 1093/176M2, Ref. 1093/177M2 and Ref.
1093/178M2, are IP cameras which can be fully controlled via TCP/IP network connection.
2.1

TECHNICAL FEATURES

Ambarella media processor with high performance and strong functions.
Non-interlaced CMOS sensor
Optimized H.264 video compression algorithms; Multi-stream transmission ensures high definition image
transmission on both narrowband and wideband.
Support simultaneous connection of up to 5 video streaming.
With Build-in Web Server, user may use standard IE browser to conduct real-time monitoring, setting and
management on the site.
Managed from Urmet UVS Client Software through NVR
Software Mobile for the following Platforms: iOS (Iphone and iPad), Android (Smartphone and Tablet) through NVR
Support remote system upgrade.
Support LAN and Internet.
Support ONVIF protocol
Support multiple network protocols, such as HTTP, TCP/IP, IPv4, UPNP, RTSP, UDP, SMTP, NTP, DHCP, DNS,
PPPOE, DDNS.
Support motion detection alarming function (user may set area and sensitivity)
Support privacy zone function.
POE power supply function
Support snapshot sendings images by E-mail.
Support automatic recovery function. It can be automatically connected in case of network interruption.
Note：The specifications of different products may be slightly varied.
2.2

OPENING THE BOX

Check that the packing and the contents are not visibly damaged. Contact the retailer immediately if parts are either
missing or damaged. Do not attempt to use the device in this case. Send the product back in its original packing if it is
damaged.
ACCESSORIES PROVIDED
1 IP Camera
1 Install Bag
Quick manual
Mini CD containing Urmet software and user manuals
Important note:
Accessories may be changed without prior notice.
34 DS1093-176