Alarm - Urmet 1080P Série Manuel D'utilisation

8.2.3

ALARM

1. Motion
Click【Alarm】→【Motion】to enter the following interface：
Setting procedure：
1. Select enable/disable motion detection.
2. Click and drag left mouse button to select motion detection area (max 4 areas).
3. Set motion detection sensitivity (Range:High, Medium, Low.)
4. It can link SMTP to send by Email
5. Click Save to make the setting effective. Possible trigger the alarm on Capture or PTZ.
SCHEDULE
2.
Click【Alarm】→【Schedule】to enter the following interface：
Schedule：（All Day, User_defined）you can schedule when alarm is active.
Press SAVE to save the changes.
DS1093-176 55