Urmet 1080P Série Manuel D'utilisation page 51

3. Email
Click【Network】→【Email】 to enter the following interface：
：
Email service setting. Apply this function with alarm function and the images captured during alarming can be
uploaded to E-mail server through network.
Email: Disable or enable
SSL : Disable or enable
SMTP Server：Input E-mail server address
Sender Pwd：Password of sender's Email
DS1093-176
SMTP Port：Default value is 25 (E-mail service port)
Authentication : Disable or enable
Sender Email：Sender's Email address
Receiver Email：Receiver's Email address (three possible
addresses
51