System - Urmet 1080P Série Manuel D'utilisation

8.2.4

SYSTEM

It contains【Date/Time】,【users】, 【info】and【log】. Their interfaces and descriptions are as follows.
1. DATE/TIME SETTINGS
Click【System】→【Date/Time】to enter the following interface：
PARAMETERS : here you can change the Device Name
DATE/TIME : in this interface, user may set Date/Time, including System Time, NTP, Date Format and Time Format.
After setting, click Save.
The device also provides three kinds of automatic time synchronization：
NTP：Synchronize time with NTP server. Click NTP to enable NTP setting. Input NTP server address, select
time zone and click Save. The system will automatically synchronize time with NTP server.
Synchronize with computer time：Device will take computer as the time server to synchronize time.
DST：Click DST to enable DST function. The device will synchronize time according to the time offset.
56 DS1093-176