Setting And Adjustment During Shooting; External Monitor Adjustment - JVC KY-F560 Mode D'emploi

3. Setting and Adjustment During Shooting

External Monitor Adjustment

Display the built-in colour bars signal at the camera on the monitor to perform colour/contrast/brightness
adjustment.
2.
[BARS] button
AW BARS
MENU
REMOTE
GENLOCK IN
DC IN
SEE INSTRUCTION MANUAL
3.~7.
1 2 3 4 5
E-18
1.
2.
3.
SET
LENS
1.
VIDEO OUT
4.
POWER
5.
6.
7.
6 7 8
Connect the colour video monitor to the [VIDEO OUT] of this
unit.
Press the [BARS] button to output the colour bars signal (EBU-
compliant colour bars).
With the colour bars displayed, turn [BLUE CHECK] at the moni-
tor to ON.
Screen turns into a monochrome of blue and colour bars ap-
pear as blue stripes.
Turn the [CHROMA] adjustment knob on the monitor and ad-
just colour bars 1 and 7 to the same brightness level.
With [BLUE CHECK] in the ON mode, turn the [PHASE] ad-
justment knob on the monitor to adjust colour bars 3 and 5 to
the same brightness level.
If brightness of colour bars 1 and 7 vary upon [PHASE] ad-
justment, repeat chroma adjustment as in step 4. .
Turn [BLUE CHECK] at the monitor to OFF and return to the
normal screen (R, G and B are all displayed).