Specifications
Image Pickup Device
Scan Mode
Effective Pixel Nos.
Lens Mount
Colour Separation System
Aspect Ratio
Horizontal Resolution
Registration
Sensitivity
Practical Minimum Illuminance
Output Signal
Dynamic Range
S / N
Gain Boost
Electronic Shutter
Variable Scan
Quantization
Contour Correction System
Sync System
CCD White Flaw Correction
White Balance
Temperature Range During Use : –5 ˚C to 40 ˚C (Humidity of 80 % or lower)
Input Supply Voltage
Power Consumption
Dimension
Mass
Accessories and Attachments
: 1/2" IT CCD x 3
: Interlace
: 440,000 Pixels (752 (H) x 582 (V))
: 1/2" Bayonet Mount
: F1.4 3-colour Separation Prism
: 4:3
: Y: 850 lines and above
: 0.05 % (or less) of entire zone (exlcuding lens distortion)
: F13 2000 lx
: 0.7 lx (F1.4, during LOLUX)
When Gain is 30 dB (calculated value)
: Composite: 1 V (p-p), 75 ¸
Unbalance (BNC)
: 400 % and above
: 62 dB
: –3/0/+3/+6/+9/+12/+15/+18 dB/ALC/LOLUX
: STEP : NORMAL(1/50),1/120,1/250,1/500,1/1000, 1/4000,1/10000 s
: V.SCAN: approx. 1/50 s - approx. 1/10000 s
: RGB 12 bits each
: H/V: Effective for both
: Internal Sync / External Sync (VBS or BB)
H PHASE and SC PHASE adjustable
: Switchable between ON/OFF
: MANUAL, AUTO1, AUTO2, PRESET, FAW
Compliance Range: 2300 K - 10000 K
: DC 12 V (when using AA-P700)
: DC 12 V
0.8 A (camera unit only)
: (W)70 mm x (H)80 mm x (D)155.2 mm
(Does not include connector)
: 840 g
: Power Cord (8P, 2 m) x 1
Instruction Manual x 1
E-47