Mounting The Lens - JVC KY-F560 Mode D'emploi

2. Preparation Before Shooting (continued)

Mounting the Lens

Follow the procedures below when mounting the auto iris lens.
Refer to the 'instruction manual' for the lens and lens remote control as well.
Lens
Compatible MD Zoom Lens
S16 x 7.3 BMD (Fujinon)
YH16 x 7 BKTS (Canon)
1.
Loosen by turning the lens lock lever in the anti-clockwise direction.
2.
Mount upon ensuring that the pin and mounting hole of the lens are aligned.
3.
Fasten by turning the lens lock lever in the clockwise direction.
4.
Plug the lens cable into the [LENS] terminal at the back of the unit and ensure that it is locked.
5.
When connecting to the lens remote control, connect the cable (female) for controlling the lens to the
remote control.
Note
When connecting the manual iris lens or lens remote control to operate the lens iris manually, set the "IRIS
MODE" item to "MANUAL".
☞ Page 31 ' "IRIS MODE" Item on "EXPOSURE" Screen'
Caution
• Perform this when the unit is off.
Connecting with the power on may give rise to malfunction of the unit.
• When removing the lens mount cap, ensure that no foreign substances are inside the mount.
• Lenses are not supplied with this unit. Make sure to use lenses that are compatible with this unit.
E-14
Pin
Hole
1.
2.
Lever for securing the lens
Control Cable
3.
Lens Cable
5.
Lock (Female)
AW BARS
MENU SET
REMOTE
LENS
VIDEO OUT
GENLOCK IN
DC IN POWER
SEE INSTRUCTION MANUAL
4.
Lock (Male)
Compatible Lens
Remote Control
(Fujinon)
RMD-10
RMD-20
Lens Remote
(Canon)
Control
TCR-101F