Part Names And Functions - JVC KY-F560 Mode D'emploi

1. Getting Started (continued)

Part Names and Functions

Front / Bottom
1
Lens Mounting Ring/Lens Lock
Lever
When dismounting the lens, do so by holding
the lens and turning the lens lock lever in the
anti-clockwise direction.
When mounting the lens, check that the guide
pins of the lens are aligned, followed by turning
the lens lock lever in the clockwise direction to
fasten.
☞ Page 14 'Mounting the Lens'
2
Camera Mounting Bracket
This is attached to the bottom face of the cam-
era when supplied. Mount it to the top surface
according to the conditions of use. Mount the
fastening screws for the camera mounting
bracket 3 to the screw holes on the top surface.
☞ Page 16 'Mounting the Camera'
E-8
1
2
3
4
C O L
O R
V I D
E O
C A M
E R A
3
Fastening Screws for Camera
Mounting Bracket
(M2.6 x 6 mm, 3 pcs)
Caution
Make sure to use screws that are supplied with
this unit.
Use of screws that are 6 mm or longer in length
may give rise to malfunction of the unit.
4
Camera Mounting Screw Holes
(1/4-20UNC)
Use when mounting this unit
to fixer or swivel bases.
(Use screws that are 7 mm
or shorter in length.)
K Y -
F 5 6
0
7mm
and
below