Display Settings - Abus IPCS10020 Manuel Utilisateur

10.3.4.1 Display settings

You can use this menu item to set the picture quality of the Speed Dome, for example brightness, sharpness,
contrast. Click on 'Default' to restore the default values.
Please note:
The display setting parameters can vary depending on the model.
Brightness
Image brightness settings. A value between 0 and 100 can be set.
Contrast
Image contrast settings. A value between 0 and 100 can be set.
Saturation
Image saturation settings. A value between 0 and 100 can be set.
Sharpness
Image sharpness settings. A higher sharpness value can increase image noise.
A value between 0 and 100 can be set.
Exposure Mode
Automatic or manual setting of exposure parameters.
Iris Mode
Under exposure mode the options are auto, aperture priority, shutter priority and manual.
Auto
The values for the aperture, exposure time and gain are automatically adjusted to the ambient brightness.
99