Password Prompt - Abus IPCS10020 Manuel Utilisateur

8. Password prompt

An administrator password is defined for the network encoder prior to delivery. For reasons of security,
however, the administrator should select a new password immediately. After this administrator password
has been saved, the network encoder asks for the user name and password every time it is accessed.
The administrator account is set up in the factory as follows: User name "admin" and password "12345".
Each time the network encoder is accessed the browser displays an authentication window and asks for the
user name and password. Should your individual settings for the administrator account no longer be
accessible, please contact our technical support team.
To enter a user name and password, proceed as follows:
Open Internet Explorer and enter the camera's IP address (e.g. "http://192.168.0.100").
You will then be presented with the following authentication prompt:
->
You are now connected to the network encoder and can see a video stream
.
76