Specific Safety Rules; Functional Description - Milwaukee 1109-20 Manuel De L'utilisateur

1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.
3. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
4. Keep hands away from all cutting edges and moving parts.
5. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
6. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
Symbology
Volts Direct Current
No Load Revolutions
per Minute (RPM)
Properly Recycle Nickel
Cadmium Batteries
Underwriters
Laboratories, Inc.
Canadian Standards
Association
1. Chuck
2. Nameplate
3. Forward/lock/reverse switch
4. Trigger
5. Battery pack release buttons
6. Battery pack
7. Side handle
8. Extension (not shown)
9. Ring clamp (RAD 3109-24 only)
10. Right angle drive unit
(RAD 3109-24 only)

SPECIFIC SAFETY RULES

Tool
No
Load
Cat. No. RPM
0-500
1109-20
RAD
3109-24

FUNCTIONAL DESCRIPTION

1
8
7
9
10
Specifications
Wood
Flat
RAD Boring Hole Auger
Bit
RPM Bits Saw
- - 1-1/2" 4" 1"
Lo 0-335 1-1/2" 4-1/2" 1-1/2"
Hi 0-750
3-1/2" 3/4"
1-1/2"
Capacities
Masonry
Steel
Ship
Auger Twist Hole
Selfeed
Drill
Bit Bit Saw
1-1/4" 1/2"
1-1/2" 2-5/8"
1-1/2" 2-9/16" 1/2" 3"
1/2"
1" 1" 2"
3
4
6
Carbide
Tipped
Bit
1/2"
1/2"
1/2"
5
page 3