Operations During A Call - Sony MEX-BT4000P Mode D'emploi

M:\081\XPML A7.0\ML\New Folder\4296017111_MEX-BT4000P_CaFR\01US-
MEXBT4000PU\01US02CD-U.fm
00ML+00COV-U.book Page 26 Friday, August 26, 2011 1:30 PM
Calling by preset number
You can store up to 6 contacts in the preset
dial. For details on how to store, see "Preset
dial" (page 27).
1 Press .
2 Press a number button ( to ) to
select the contact you want to call.
3
Press (handsfree).
The phone call starts.
Calling by redial
1 Press  and rotate the control
dial until "REDIAL" appears, then
press it.
The phone call starts.

Operations during a call

Presetting the volume of the ringtone
and talker's voice
You can preset the volume level of the
ringtone and talker's voice.
To adjust the ringtone volume:
Rotate the control dial while receiving a call.
Ringtone volume can be adjusted.
To adjust the talker's voice volume:
Rotate the control dial during a call. The
talker's voice volume can be adjusted.
Note
If the Bluetooth Phone source is selected, rotating
the control dial will only adjust the talker's
volume.
Mic gain adjustment
You can adjust the volume for the other
party. Press  (MIC) to adjust the volume
levels ("MIC-LOW," "MIC-MID," "MIC-
HI").
26
EC/NC Mode (Echo Canceller/Noise
Canceller Mode)
You can reduce echo and noise.
Press and hold  (MIC) to set to "EC/
NC-1" or "EC/NC-2."
Call transfer
In order to activate/deactivate the
appropriate device (this unit/cellular
phone). Press  or use your cellular
phone.
Notes
• For details on cellular phone operation, refer to
your cellular phone manual.
• Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.
Internal phonebook
You can transfer the phonebook data of a
cellular phone into this unit. This unit can
store data of up to 5 cellular phones, 1,000
contacts. You can only access to the internal
phonebook of the cellular phone that is
currently connected to this unit.
Notes
• Confirm that the cellular phone and this unit is
connected via the Bluetooth function.
• Confirm that "HU" is selected in "PH BOOK
SEL" in the call menu beforehand (page 25).
• For details on how to transfer the phonebook
data from the cellular phone, refer to your
cellular phone manual.
1 Press  and rotate the control
dial until "PHONEBOOK" appears,
then press it.
2
Rotate the control dial until "ADD
CONTACT" appears, then press it.
"WAITING" appears in the display of
this unit.
3
Operate your cellular phone to transfer
the phonebook data.
masterpage:Left
MEX-BT4000P
4-296-017-11(1)