AEG RMB76311NX Mode D'emploi page 28

28 www.electrolux.com
Adjusting the door handle
Before you use the appliance, please
check the refrigerator handles. If the
handles are loose, please adjust them by
using an Allen wrench in the clockwise
direction until handles are securely in
place. Each one of the handles is fitted
with 2 screws.
Adjusting the doors
• Both left and right doors are equipped
with adjustable axes, which are located
in the lower hinges.
• Before adjusting its doors, please
ensure that the refrigerator is level.
Please review the previous section on
"Leveling appliance". If you find the
top of the doors are uneven, insert the
Allen wrench into the hinge axis, and
turn it clockwise to rise the door or
anticlockwise to lower the door, and
insert an E Ring into the gap.
Allen wrench (Provided)
150213_UM of FrenchDoor-AEG_NL-EN-FR-DE-LT-PL-PT-ES.indd 28
Hexagon socket
set screws
Allen wrench (Provided)
E Ring
Adjustable part
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain proper ventilation
around the appliance for heat dissipation.
For this reason, sufficient space should be
provided around the refrigerator and the
area should be clear of any obstruction
that affects the air circulation.
100mm
75mm
100mm
100mm
S u g g e s t i o n : t o e n s u r e a p r o p e r
functioning of the appliance keep the
distances shown on the graphic above.
908mm
1720mm
2016-09-20 10:24:30