Basic Operation 1 - Teac MC-DV250 Manuel Du Propriétaire

2
1
2
3
1
36
1
1
< If the PLAY/PAUSE button or the OPEN/CLOSE button is
2
3
3
Recording a Source
1
1
2
< The volume and tone control have no effect on the recording
< If the listening mode is set to Dolby Virtual Speaker, the sound

Basic Operation 1

Press the STANDBY/ON switch to turn the unit on.
pressed in the standby mode, the unit is also turned on.
Select a source by pressing the FUNCTION button.
The selected source is shown on the front panel's display.
DVD
Tuner (FM or AM, and Frequency is displayed)
TAPE
AUX
Play the source, and gradually turn up the volume to the
required level by pressing the VOLUME buttons.
You can record a source such as a Compact Disc onto a MD or
a cassette tape connected to the DIGITAL OUT terminal or the
REC jacks.
Select a source to be recorded by pressing the
FUNCTION button.
Do not select TAPE.
Start recording.
signals.
is recorded with the surround effect.
ENGLISH