Teac MC-DV250 Manuel Du Propriétaire page 14

A
B
14
Connection 1 (FM antenna)
CAUTION:
< Switch off the power to all equipment before making
connections.
< Read the instructions of each component you intend to use
with this unit.
< Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.
A FM Indoor Antenna
In an area with strong FM signals, the T-type FM antenna
provided with this unit is sufficient.
Extend the antenna into a "T" shape and connect the two
wires at the base of the "T" to the provided matching
transformer, as shown.
After completing connection, plug the transformer into the
"FM 75Ω" socket. Extend the top of the "T" and tune the
tuner to your favorite station (see page 80). Adjust the
antenna in a suitable location like a window frame or wall
until the reception is best and then affix the antenna in that
position using thumb tacks, push pins or any other suitable
means.
B FM Outdoor Antenna
In an area where FM signals are weak, it will be necessary to
use an 75-ohm unbalanced-type outdoor FM antenna.
Generally, a 3-element antenna will be sufficient; if you live
in an area where the FM signals are particularly weak, it may
be necessary to use one with 5 or more elements.
< Disconnect the FM indoor antenna when using an outdoor
antenna.
ENGLISH