Battery Installation - Teac MC-DV250 Manuel Du Propriétaire

V LISTENING button
Use this button to select a listening mode.
AUDIO button (L/R)
W
Use this button to select the desired language for audio
playback.
X SUBTITLE button
Use this button to select subtitles.
ANGLE button
Y
Use this button to change camera angles.
Z PBC button
When a VCD (version 2.0) is loaded, use this button to turn
the PBC function on or off.
During PBC playback, use this button to display a menu.
a CLEAR button
Used for clearing selection, etc.
b ZOOM button
Use this button to enlarge the video image.
c PROGRAM button
This button is used to program the tracks on a CD for
playback in the desired order.
If you press the PROGRAM button during playback of MP3,
the list mode changes
as follows:
Folder list mode:
The structure of folders and files are displayed.
File list mode:
All the files on the disc are displayed at once, ignoring
folders.
d PLAY/PAUSE button (G/J)
Use this button to start or pause playback.
e STOP button (H)
Use this button to stop playback.
f RANDOM button
Used for shuffle playback.
g
VOLUME buttons (+/–)
Use these buttons to adjust the master volume.
h MUTING button
Use this button to mute the sound.
i I/P button
Use this button to switch the Interlace scan and Progressive
scan.
Remote Control Unit
The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there
are any obstacles between the unit and the remote control.
< If the remote control unit is operated near other products
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other products may
operate incorrectly.

Battery Installation

Remove the battery compartment cover.
1
2 Insert two "AAA" (R03, UM-4) dry batteries. Make sure that
the batteries are inserted with their positive "+" and negative
"_" poles positioned correctly.
Close the cover.
3
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive "+" and
negative "_" polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they leak,
wipe away the liquid inside the battery compartment and
replace the batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
ENGLISH
27