Use; Preparing The Carpet; Preparing The Device/Fi Lling The Fresh Water Tank - DS Produkte VC9388 Mode D'emploi

Use

Preparing the carpet

1. Thoroughly vacuum clean the carpet to be treated with a vacuum cleaner. Use a brush
adapter for this (if possible).
2. If possible, remove all furniture from the carpet. Place a plastic tarp under or around
the legs of large pieces of furniture that can't be moved aside and only remove the
tarp once the carpet is completely dry after cleaning. Otherwise the wet carpet could
damage the legs.
3. Check the carpet's colour-fastness. Dip a piece of white fabric in the cleaning solution
that you want to use (see section "Preparing the device/fi lling the fresh water tank")
and carefully rub on a hidden part of the carpet. If the white fabric does not discolour,
you can clean the carpet with the device. For multicoloured carpets, test every colour
for colour-fastness.
Preparing the device/fi lling the fresh water tank
CAUTION!
❐ Only fi ll the fresh water tank with commercially-available carpet cleaners for carpet
washers.
❐ Do not use any high-foaming cleaners as an excessive amount of foam impairs the
functioning of the device.
4. Turn the hook of the upper cord bracket up.
5. Insert the connecting piece on the bottom of the fresh water
tank in the ring on the bottom of the midsection. Push the
top part of the tank against the midsection until the catch
audibly locks into place.
pet cleaner.
1. Hold the fresh water tank (3) by the handle and depress
the release button (2). The tank will be released from the
locking mechanism.
2. Take the fresh water tank out of the device.
3. Unscrew the tank cap and fi ll it with the carpet cleaner that you
want to use. Please follow the dosing instructions for the cleaner.
20
You have now assembled your car-