Clip Attachment & Detachment; Warning; Loop Attachment & Detachment - arjo MAA2050M Notice D'utilisation

Lift
SWL
Spreader Bar
Sling SWL
EN
Clip Attachment & Detachment
NOTE
If available on your lift device, reposition the
spreader bar using the Dynamic Position
sling. See lift IFU for instructions.
Attach the Clips (5 steps)
Make sure the lug is locked at the top end of the
(See Fig. 4 )
Loop Attachment & Detachment
2 point spreader bar:
4 point spreader bar:
the back hooks

WARNING

Do not cross the shoulder straps.
Attach the Loops (5 Steps)
WARNING
Use the same loop length (loop colour) for
the shoulder straps and the same length
(loop colour) for the leg straps.
Place the loop over the spring loaded latch (A
(See Fig. 6 )
Fig. 3
125 kg
2 point 2 point
Small
Size Size
- L
(See Fig. 3 )
Fig. 4
2 point 4 point
loop loop
Size Size
L L
Make sure the strap is not squeezed in between the
Detach the Clips (3 steps)
Make sure that the weight of the patient is taken up by
(See Fig. 5 )
Make sure the lug is unlocked at the bottom of the
Make sure that the spring loaded latch closes
NOTE
The loops lengths on the straps are used to
adjust the resident's position and comfort.
• Loops closer to the shoulders;
• Loops further away from the shoulders;
• Loops closer to the legs;
• Loops further away from legs;
Fig. 5
8
440
200 kg 272 kg
2 point
Fix
Size Size
L L
(See Fig. 6 )
Fig. 6
A