elco VL 04.540 DP Notice D'emploi page 36

Start-up
Adjustment mode
Menu "PARAMETER"
Presetting the burner
MAX. POWER SETTING
AIR: .. ' .
NEXT
?
MEDIUM SETTING
AIR: .. ' .
NEXT
?
MINIMUM SETTING
AIR: .. ' .
NEXT
?
IGNITION SETTINGS
AIR: .. ' .
NEXT
?
MEDIUM VALVE SUPPLY
AIR:
NEXT
?
MAX VALVE SUPPLY
AIR:
NEXT
?
READY TO BEGIN
COMBUSTION
SETTINGS
?
36
"PROGRAM"
In the "PROGRAM" menu, points P9/P3/P1/P0/P2/P4 can be preset in accordance
with the adjustment table (page 10) for the required burner output. The control unit
then switches to the "SETTING" menu.
• Access to the setting mode.
FUEL OIL:
• Select "PROGRAM" via
• Confirm with
Adjusting the air value.
• Place the cursor in the air position, using
FUEL OIL:
• Activate via
• Set the new value using
• Confirm with
FUEL OIL: Changes between setting points P9/P3/P1/P0/P2/P4.
PREVIOUS
• Place the cursor on "NEXT" or "PREVIOUS" using
• Confirm with
FUEL OIL:
PREVIOUS
FUEL: .. ' .
PREVIOUS
FUEL: .. ' .
PREVIOUS
Direct access to this menu is possible via setting mode, by selecting "SETTINGS"
07/2009 - Art. Nr. 4200 1023 3700A
or .
.
(the cursor flashes).
or .
.
.
or .
or .
.