Publicité
GB
Operating Instructions
Choosing working tool
A correct working tool is a prerequisite for good operation. To avoid unnecessary machine damage, it is important to
choose working tools of a high quality.
The narrow chisel should be used for demolition and cutting work in concrete and other types of hard material.
The moil point should only be used for creating holes in concrete and other types of hard material.
The wide chisel should be used in soft materials e.g. asphalt and frozen ground.
Always use a sharp tool to be able to work effectively. A worn out tool causes increased vibrations and the operation will
take longer.
16
Publicité
Chapitres
Dépannage
