Warranty/Service - Beurer TL 80 Mode D'emploi

Product classification
Mains connection
Operating conditions
Storage conditions
Degree of efficiency of the ballast
Source effiency (lm/W) of the bulb
Color temperature of tubes
Subject to technical modifications.
The serial number is located on the device or in the battery compartment.
Brightness: 10,000 Lux (this light intensity value is just for information and regarding IEC 60601-2-57, this
light source is classified as an exempt group).
Notes on electromagnetic compatibility
The device complies with the EU Medical Devices Directive 93/42/EEC, the German Medical Devices Act
(Medizinproduktgesetz) and the European standard EN 60601-1-2 (in accordance with CISPR 11, IEC
61000-3-2, IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-
6, IEC 61000-4-8, IEC 61000-4-11) and is subject to particular precautions with regard to electromagnetic
compatibility.
• The device is suitable for use in all environments listed in these instructions for use, including domestic
environments.
• The use of the device may be limited in the presence of electromagnetic disturbances. This could result
in issues such as error messages or the failure of the display/device.
• Avoid using this device directly next to other devices or stacked on top of other devices, as this could
lead to faulty operation. If, however, it is necessary to use the device in the manner stated, this device
as well as the other devices must be monitored to ensure they are working properly.
• The use of accessories other than those specified or provided by the manufacturer of this device can
lead to an increase in electromagnetic emissions or a decrease in the device's electromagnetic immu-
nity; this can result in faulty operation.
• Failure to comply with the above can impair the performance of the device.

11. Warranty/service

In case of a claim under the warranty please contact your local dealer or the local representation which is
mentioned in the list "service international".
In case of returning the unit please add a copy of your receipt and a short report of the defect.
The following warranty terms shall apply:
1. T he warranty period for BEURER products is either 3 years or- if longer- the country specific warranty
period from date of Purchase.
In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or
invoice.
2. Repairs (complete unit or parts of the unit) do not extend the warranty period.
3. The warranty shall not be valid for damages because of
a. improper treatment, e.g. nonobservance of the user instructions.
b. repairs or tampering by the customer or unauthorised third parties.
c. transport from the manufacturer to the consumer or during transport to the service centre.
Protection against moisture: IP21
Electrical protection class: class II
230 V ~, 50 Hz
+5°C to 35°C, 30 – 90 % relative humidity; 700~1060hPa
+5°C to 50°C, 30 – 90 % relative humidity; 700~1060hPa
~ 98%
64 lm/W
6.500 Kelvin
14