Hama TS33C Mode D'emploi page 4

Warning – Batteries
• Only use batteries (or rechargeable
batteries) that match the specified
type.
• Before you insert the batteries, clean
the battery contacts and the polar
contacts.
• Do not allow children to change
batteries without supervision.
• Do not mix old and new batteries or
batteries of a different type or make.
• Remove the batteries from products
that are not being used for an
extended period (unless these are
being kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of
children.
• Never open, damage or swallow
batteries or allow them to enter the
environment. They can contain toxic,
environmentally harmful heavy metals.
• Immediately remove and dispose of
dead batteries from the product.
• Avoid storing, charging or using the
device in extreme temperatures and
extremely low atmospheric pressure
(for example, at high altitudes).
4. Getting Started
Inserting the battery
• Open the battery compartment (2), insert
the batteries with the correct polarity
and close the battery compartment (2).
The outdoor sensor is now ready for
operation.
Replacing the batteries
• Open the battery compartment (2),
remove and properly dispose of the dead
batteries and insert two new AA batteries
with the correct polarity. Then close the
battery compartment cover.
Note
Before use, make sure that you insert the
batteries in the measuring station first
and then in the base station.
5. Installation
Note – Installation
• We recommend initially placing the
base and measuring stations in the
intended locations without installing
them and making all the settings
described in 6. Operation.
• Only install the stations once the
appropriate settings have been made
and a stable wireless connection is
established.
• Do not mount the product above
locations where persons might linger.
3