Linea 2000 DOMO DO926BFK Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
6.
Maak de bouten, scharnierbeugel en het stelvoetje aan de andere kant van de bodem
vast.
wer screws and lower
unit bottom. Reverse the
ove and secure it with
place, inserting it onto the
ATION
ATION
e the lower screws and lower
rom the unit bottom. Reverse the
the lower screws and lower
inge, move and secure it with
om the unit bottom. Reverse the
wer screws to the opposite side of
nge, move and secure it with
t bottom. Carefully set the lower
er screws to the opposite side of
ack into place, inserting it onto the
bottom. Carefully set the lower
inge.
ck into place, inserting it onto the
nge.
7.
Zet de onderste deur voorzichtig op zijn plaats. Zorg dat de deur zowel horizontaal als
ddle hinge. Screw the
verticaal is uitgelijnd zodat de afdichtingen op alle zijden gesloten zijn voordat u het
nto the opposite side of
middelste scharnier volledig vastmaakt. Breng het scharnier terug en schroef vast.
lower door is aligned
e the middle hinge. Screw the
and vertically, so that
hinge onto the opposite side of
the middle hinge. Screw the
t.
e closed on all sides
hinge onto the opposite side of
.
ly tightening the hinge.
ure the lower door is aligned
izontally and vertically, so that
ure the lower door is aligned
seals are closed on all sides
zontally and vertically, so that
ore finally tightening the hinge.
e upper door back into
seals are closed on all sides
ore finally tightening the hinge.
in onto the middle hinge.
8.
Plaats de bovenste deur. Plaats de scharnieren van de bovenste deur, schroef deze vast
en plaats het afdekplaatje terug.
ly set the upper door back into
r hinge and screw it
nserting in onto the middle hinge.
y set the upper door back into
p of the unit.
nserting in onto the middle hinge.
he upper hinge and screw it
to the top of the unit.
he upper hinge and screw it
upper door is aligned
o the top of the unit.
and vertically, so that
ure the upper door is aligned
e closed on all sides
izontally and vertically, so that
ure the upper door is aligned
seals are closed on all sides
ly tightening the hinge.
zontally and vertically, so that
ore finally tightening the hinge.
seals are closed on all sides
ore finally tightening the hinge.
over back.
hinge cover back.
9.
Met de deur gesloten, controleer of de deur zowel horizontaal als verticaal is uitgelijnd
hinge cover back.
en de afdichtingen op alle zijden gesloten zijn voordat u het bovenste scharnier volledig
vastmaakt. Indien nodig, stel de stelvoetjes af.
www.domo-elektro.be
Middle hinge
Middle hinge
Middle hinge
11
DO926BFK

Publicité

Table des Matières
loading

Table des Matières