Battery Removal - Remington MB4045 Mode D'emploi

ENGLISH
, TRIMMING THE NAPE OF YOUR NECK
• You will need a hand mirror for this operation if performing it alone.
• Use your fingers to lift the hair at the base of your head up off the neck. Your
index finger should be covering the roots of the hairs you are lifting to
prevent accidental removal by trimmer.
• Using your other hand, hold the trimmer to the base of your neck with the
cutting unit facing up, and move the trimmer up the length of the neck until it
touches your finger covering the hair roots at the base of your head.
• Be sure to move the unit slowly when performing this operation and to keep
the hair roots at the base of your head out of the way of the trimmer.
E Tips for best results
• Beard, moustache and sideburn hairs should be dry.
• Always brush your beard before beginning to trim, shape or style it.
• Avoid using lotions before using your trimmer.
• If you are trimming for the first time start with the maximum comb length
setting.
, ATTACHING AND REMOVING THE BLADE
• To remove the blade press the release button found at the top of the trimmer
where it meets the back of the blade head and push the blade cartridge
upwards and away from the trimmer.
• To attach a blade, snap the desired cartridge in place until it clicks.
C CLEANING AND MAINTENANCE
• To ensure long lasting performance clean after each use.
• Ensure the appliance is switched off and unplugged from the mains.
• Always store the attachment guide comb on the trimmer blade.
• Do not use harsh or corrosive cleaners on the unit or blades.
• To clean the unit, wipe with a damp cloth and dry immediately.
• Wash the removable blade cartridge under a running tap to remove any hair
clippings.
• We recommend that you add a couple of drops of oil to the blades every so
often.

BATTERY REMOVAL

• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
8