Aux Playback; Usb Playback - Sonoro LOUNGE SO-320 Mode D'emploi

14. AUX playback

Using an RCA cable, you can connect and play additional audio devices via the AUX
1 port. Using a 3.5mm jack plug, you can connect additional audio devices to the
LOUNGE via the AUX 2 port.
Fig.46. Activating AUX playback
1. Switch on the LOUNGE.
2. Plug the RCA cable into the AUX 1 port or the 3.5mm jack plug into the AUX 2 port
on the rear of the device.
3. Press the [MENU] button until the display shows [AUX.1 Input] or [AUX.2 Input]. You
can also press the [AUX] button on the remote control.
W The display will show the [AUX.1 Input] or [AUX.2 Input]
4. Switch on the external device and start playback on the external device.

15. USB playback

You can connect additional devices and play music using the USB Charger & Playback
port on the rear of the LOUNGE.
The MP3 and WMA formats can be played back.
Fig.47. Setting USB playback
1. Switch on the LOUNGE.
2. Press the [MENU] button until the display shows [USB Device] or press the [USB]-
button on the remote control.
W The display shows [USB Device] (Fig.47).
© sonoro audio GmbH 2018
(Fig.46)
GB
93