Sonoro LOUNGE SO-320 Mode D'emploi page 71

You can set three different date formats (Fig.12. A/B and C) as well as the current day
The configuration options are:
• A: Current day, day, month, year.
• B: Current day, month, day, year.
• C: Current day, month (in words), day, year.
Setting display dimmer
Fig.13. Setting display dimmer
Depending on the ambient brightness, the display is switched to bright or dark. The
ambient brightness is detected by a sensor beside the display.
You can set the desired brightness level.
• Display High: Level 08 to 15 (Fig.13/A)
• Display Low: Level 01 to 08 (Fig.13/B)
To this end, you can proceed as follows to set the desired brightness of the alarm
light and the timeframe in which the alarm light should reach this brightness:
Setting alarm light
Fig.14. Setting alarm light
In addition to the alarm, you can also be woken up in the mornings with a light that
gets gradually brighter (only in conjunction with sonoroLIGHT).
To this end, you can proceed as follows to set the desired brightness of the alarm
light and the timeframe in which the alarm light should reach this brightness:
• Brightness: 01 to 32 (Fig.14./A)
• Alarm light: 0 to 60 min (Fig.14/B)
© sonoro audio GmbH 2018
GB
71