Accessing Dab Information; Setting The Drc - Sonoro LOUNGE SO-320 Mode D'emploi

11.2.4 Accessing DAB information

In DAB mode, you can access information about the station, program, etc. The
information is shown in the following order:
• Station name (starting point)
• Broadcaster
• DLS ("Dynamic Label Service ", program related information such as artist, track,
etc.)
• Program type (e.g. sports)
• Station frequency
• Signal quality
1. In DAB mode, press the [STOP] button on the device to access the DAB
information. Alternatively, you can press the [DAB] button on the remote control.
W The display shows the information in the sequence indicated above.
2. Press the [STOP] button on the device or the [DAB] button on the remote control
again.
W The display shows the next information.
3. Proceed accordingly to access the remaining DAB information.

11.2.5 Setting the DRC

The DRC setting (Dynamic Range Compression) reduces the difference in volume
between quiet and loud passages.
There are 3 different setting possibilities for the DRC:
• DRC High
• DRC Low
• DRC Off
Condition:
The device is in DAB mode.
1. Press the [SETUP] button.
W The display shows the [DAB Preset List] text.
88
© sonoro audio GmbH 2018