Playing Music Via Bluetooth; Aux Playback; Usb Playback - Sonoro SO-110 Mode D'emploi

Masquer les pouces Voir aussi pour SO-110:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 101
2.
Pair your mobile phone or Bluetooth device to
the sonoroRADIO via Bluetooth.
i
Enter code '0000' .
ð After pairing, the display permanently shows
the [Bluetooth] text.
Deleting connected devices
3.
Press the [Memory 1] button on the top of the
device or the remote control and hold for
approx. 3 seconds.
ð The display shows [Unpaired] for 2 seconds.
12.2

Playing music via Bluetooth

Starting playback
1.
Press the click wheel or the [Play/Pause] button
on the sonoroRADIO remote control to start
playback.
Pausing playback
2.
Press the click wheel or the [Play/Pause] button
on the sonoroRADIO remote control again to
pause playback.
i
The buttons on the sonoroRADIO offer only limited
control over external devices.
13

AUX playback

The AUX input can be used to connect and play back
from other audio devices.
Fig. 42: Activating AUX playback
1.
Switch on the sonoroRADIO.
2.
Connect the external audio device to the AUX
input on the sonoroRADIO.
3.
Press the [MODE] button until the display shows
[AUX. Input]. You can also press the [AUX]
button on the remote control.
ð The display shows [AUX] (Fig. 42).
4.
Turn on the external device and start playback
on the external device.
14

USB playback

You can connect additional devices and play music
through the USB playback port on the back of the
sonoroRADIO.
i
The MP3 format "MPEG 1 layer 3 with sample
rates of 44.1kHz and 22.05 kHz" can be played
back.
Fig. 43: Setting USB playback
1.
Switch on the sonoroRADIO.
2.
Press the [MODE] button until the display shows
[USB] mode, or press the [USB] button on the
remote control.
ð The display shows the [USB] symbol (Fig. 43).
3.
Connect an external USB device to the sonoroR-
ADIO.
ð The display shows [Reading...].
4.
Press the [Play/Pause] button to commence
playback.
i
By pressing the [USB] button on the remote
control, you can edit the ID3 metadata, if
available. The sequence for this is:
'Track è Artist è Album è Elapsed time'
Selecting MP3 folders
5.
Press the [Memory 1] button to select the pre-
vious MP3 folder.
6.
Press the [Memory 2] button to select the next
MP3 folder.
Stopping USB playback
7.
Press the click wheel or the [Play/Pause] button
on the remote control to pause playback.
93

Publicité

Table des Matières
loading

Table des Matières