Cleaning - Sonoro SO-110 Mode D'emploi

Malfunction
Alarm does not work
No Bluetooth connection, or Blue-
tooth connection interrupted
18

Cleaning

L NOTICE!
Material damage from improper cleaning!
Only clean the device from the outside using a
dry, soft cloth. Never use abrasive or solvent-
based cleaning agents as these may damage the
surface of the device.
96
Possible cause
Alarm is not switched on
Alarm volume is set to minimum
Headphones are connected
Malfunctions due to other radio
transmitters or devices
Software not up to date
Elimination
Switch on the alarm (see Ä Chapter
9.5 'Switching the alarm clock on/
off' on page 88).
Increase the volume (see
Ä Chapter 9.3 'Setting the alarm
volume' on page 88).
Pull the headphones out of the
jack.
Increase the distance between the
sonoroRADIO and your television.
Make sure that your external Blue-
tooth device has the latest software
version installed.