Cleaning - Sonoro STREAM SO-410 Mode D'emploi

19 Cleaning

NOTICE!
Material damage due to improper cleaning!
Improper cleaning can result in damage to sonoroSTREAM or cause certain
functions to stop working.
Never use abrasive or solvent-based cleaning agents, as these may
•
damage the surface of sonoroSTREAM.
Never use hot or compressed air to dry sonoroSTREAM.
•
The edges and corners of sonoroSTREAM are vulnerable to pressure.
•
Protect these areas to prevent them from being subjected to excessive
pressure.
Cleaning off fingerprints and light soiling
Clean sonoroSTREAM only from the outside with a soft, dry cloth.
•
Cleaning off heavy soiling
Clean sonoroSTREAM only from the outside with a slightly damp cloth and
•
then dry sonoroSTREAM with a soft, dry cloth.
© sonoro audio GmbH 2019
GB
89