AEG GS45BV221 Notice D'utilisation page 59

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode.
3. Set the programme.
• The related programme indicator
comes on.
• The programme duration flashes in
the display.
4. Close the appliance door. The pro-
gramme starts.
• If you open the door, the display
shows the programme duration
that decreases with steps of 1 mi-
nute.
Starting a programme with
delay start
1. Set the programme.
2. Press the delay button again and
again until the display shows the de-
lay time you want to set (from 1 to 24
hours).
• The delay time flashes in the dis-
play.
• The delay indicator is on.
3. Close the appliance door. The count-
down starts.
• If you open the door, the display
shows the countdown of the delay
start that decreases with steps of 1
hours.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
Press and hold function buttons (B) and
(C) at the same time until:
• All the programme indicators come
on.
When you cancel a delay start,
the appliance goes back to set-
ting mode. You have to set the
programme again.
Cancelling the programme
Press and hold function buttons (B) and
(C) at the same time until:
• All the programme indicators come
on.
Make sure that there is detergent
in the detergent dispenser be-
fore you start a new programme.
At the end of the programme
When the programme is completed, an
intermittent acoustic signal operates and
the display shows 0.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
If you do not press the on/off
button, the AUTO OFF device
automatically deactivates the ap-
pliance after some minutes. This
helps to decrease the energy
consumption.
• Let the dishes become cold
before you remove them from
the appliance. Hot dishes can
be easily damaged.
• First remove the items from
the lower basket, then from
the upper basket.
• There can be water on the
sides and on the door of the
appliance. Stainless steel be-
comes cool more quickly than
the dishes.
ENGLISH
59

Publicité

Table des Matières
loading

Table des Matières