Before Starting The Equipment; Cleaning, Maintenance And Ordering Of Spare Parts - EINHELL DSS 312 Instructions D'origine

The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Screw the plug-in nipple included in delivery into
the air connection, having fi rst wrapped 2 - 3
layers of sealing tape around the thread. Attach
the required drive socket/bit to the square drive
mount. Adjust the direction of rotation on the gui-
de lever.
R = reverse/release screw, F = forward/tighten
screw. Place the drive socket or bit on the nut or
screw head. Press the trigger. The air supply can
be adjusted by simultaneously depressing and
turning the air regulator. Mark 4 = max. torque,
mark 1 = min. torque. The tool is connected to
the air supply by means of a fl exible pneumatic
hose with a quick-release coupling.
Anl_DSS_312_SPK7.indb 13 Anl_DSS_312_SPK7.indb 13
GB
6. Operation
Observance of the following maintenance inst-
ructions will ensure that this quality tool gives you
years of troublefree service. Regular lubrication
is vital for the long-term, reliable operation of your
impact screwdriver. Use only special tool oil for
this purpose. You can choose from the following
options for lubricating the tool:
6.1 By mist oiler
A complete conditioning unit includes a mist oiler
and is fi tted to the compressor.
6.2 By hand
Each time before you use your impactscrewdriver,
feed 3-5 drops of special tool oil into the air con-
nection. If the pneumatic tool has not been used
for several days, you must feed 5-10 drops of oil
into the air connection before you switch on. Keep
your pneumatic tool in dry rooms only.
6.3 Adjustment of resistance at the pivot
arm (3)
By turning the adjustment screw (6) the resis-
tance when shifting the bolts (3) can be adjusted.
7. The warranty does not cover:
•
Wearing parts
•
Damage caused by an unacceptable level of
working pressure.
•
Damage caused by unconditioned com-
pressed air.
•
Damage caused by improper use or unautho-
rized tampering.
8. Cleaning, maintenance and
ordering of spare parts
Danger!
Always pull out the mains power plug before star-
ting any cleaning work.
8.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
•
We recommend that you clean the device
immediately each time you have finished
- 13 -
12.02.16 08:13 12.02.16 08:13