Proper Use; Technical Data; Important - EINHELL DSS 312 Instructions D'origine

3. Proper use

The impact screwdriver is a handy pneumatic
tool for use in DIY and automotive workshops. It
is ideal for fastening and releasing threaded con-
nections on motor vehicles (wheels etc.) and on
farming equipment.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Repairs and maintenance work are to be carried
out only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you
use a hose that has too small an inner diame-
ter or which is too long.

Important

•
In case of very tight or rusted wheel nuts, use
a wheel spider or a torque wrench to loosen
the wheel nut.
•
Use a hammer screwdriver to fasten the
wheel nuts. It is then important to tighten
the wheel nuts with a torque wrench in ac-
cordance with torque specified by the vehicle
manufacturer.
Anl_DSS_312_SPK7.indb 12 Anl_DSS_312_SPK7.indb 12
GB

4. Technical data

Release torque max. ................................312 Nm
Working range (max. thread size).................. M14
Permissible working pressure max. ........... 6.3 bar
Idle speed ...........................................7000 min
Vibration aw ...........................................5.17 m/s
K uncertainty ............................................1.5 m/s
Square drive ............................................1/2 inch
Air consumption .................................... 141 l/min.
Recommended hose diameter internal .≥ Ø 9 mm
Weight.........................................................2.0 kg
Air quality
cleaned and oiled
Air supply
via conditioning unit with fi lter pressure reducer
and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor rating of
2.2 kW
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN ISO 15744, EN ISO 28927-2.
L sound pressure level ........................ 94 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 105 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN ISO
15744, EN ISO 28927-2.
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
- 12 -
-1
2
2
12.02.16 08:13 12.02.16 08:13