Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GDR Professional 18V-200 C Notice Originale

14 | English
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Read the corresponding operating instructions for informa-
tion about the GCY 30-4 Bluetooth
Caution! When using the power tool with Bluetooth
u
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
®
Bluetooth in aircraft. Avoid using the product near
your body for extended periods.
®
The Bluetooth word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.

Technical Data

Cordless impact screwdriver
Article number
Rated voltage
A)
No-load speed
– Setting 1
– Setting 2
– Setting 3
A)
Impact rate
– Setting 1
– Setting 2
– Setting 3
Max. torque
1 609 92A 5D0 | (29.08.2019)
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
(2)
(3)
®
Low Energy Module.
(4)
®
, a
(5)
(6)
(7)
(8)
®
in the vicinity of
(9)
(10) Button for light
(11) Speed indicator
(12) Rotational direction switch
(13) On/off switch
(14) Handle (insulated gripping surface)
(15) Screwdriver bit with ball catch
(16) Universal bit holder
(17) Screwdriver bit
(18) Application tool
A) Accessories shown or described are not included with the
GDR 18V-200 C
3 601 JG4 1..
V=
-1
min 0–1100
-1
min 0–2300
-1
min 0–3400
-1
min 0–2300
-1
min 0–3400
-1
min 0–4000
Nm
Tool holder
Locking sleeve
A)
Carrying loop
Cover for GCY 30-4 Bluetooth® Low Energy Module
A)
Belt clip
A)
Battery
A)
Battery release button
Button for electronic speed preselection
Light
A)
A)
A)
product as standard. You can find the complete selection of
accessories in our accessories range.
GDX 18V-200 C
3 601 JG4 2..
18 18
0–1100
0–2300
0–3400
0–2300
0–3400
0–4200
200 200
A)
GDS 18V-200 C
3 601 JG4 3..
18
0–1100
0–2300
0–3400
0–2300
0–3400
0–4200
200
Bosch Power Tools