IWC Schaffhausen AQUATIMER AUTOMATIC 2000 Mode D'emploi page 28

Taking the bracelet apart
and removing individual links
securing pin (1) at the desired point of separation and,
atthe same time, displace the pivot pin laterally by
about 3 mm (2) with the second special tool.
Open the push-button release
safety clasp by pressing the button
on the side. Lay the bracelet with
its top surface on a firm base.
Using the special tools provided,
you can now push down the
Now pull the protruding pivot pin
from the bracelet (3). The metal
bracelet is now separated, and you
can adjust the length of the brace-
let by removing or adding indi-
vidual links.