Technical Information - Outdoorchef Brisbane 3B Mode D'emploi

Manual australische Grills 2009:Layout 1 26.11.08 09:57 Seite 12
If you could not start the grill after above mentioned
trouble shouting please contact your local dealer.
Warranty
This warranty covers defects in parts and workman-
ship for the following period:
• 24 months from the original purchase date
Warranty claims must be taken to the authorized
dealer where the barbecue was purchased along with
proof of purchase. Any damage claim regarding the
Enamelling must be submitted within 30 days of pur-
chase to be 100% covered by the warranty. This
applies to new barbecues which have not been used.
The following conditions are NOT covered by this
warranty:
• Unevenness and colour variations in the enamel-
ling.
• Damage caused by improper assembly or disregard
of the manual.
• Change of colour due to corrosion or rust, as a
result of the effects of weather or improper use of
chemicals.
• Damage due to alterations, use of product for pur-
poses other than it is intended for, or wilful
damage.
• Damage caused by improper maintenance or re -
pairs by an unauthorised person.
• Acts of god.
• normal wear and tear of grid, burners, thermome-
ter, ignition, electrodes, ignition cable, gas hose
and gas pressure regulator.
• Damages occurring in transport or shipping and
handling costs.
• Damages occuring as the result of industrial use.
(hotels, retaurants, organized events etc.)

Technical Information

Brisbane
CE
Gas
Heat Input max
Gas consumption
Injector 28-30/37mbar
Injector (50mbar)
Wellington
CE
Gas
Heat Input max
Gas consumption
Injector 28-30/37mbar
Injector (50mbar)
Auckland
CE
Gas
12
0063BT3628
LPG 30/31
11.70 KW
852 g/h
0.98 mm / marking: BJ
0.88 mm / marking: AJ
0063BT3628
LPG 30/31
12.80 KW
932 g/h
0.86 mm / marking: BE
0.74 mm / marking: AE
0063BT3628
LPG 30/31
Heat Input max 9.60 KW
Gas consumption 699 g/h
Injector 28-30/37mbar 0.86 mm / marking: BE
Injector (50mbar) 0.74 mm / marking: AE
Infrared Brenner
(available on the Auckland model)
CE 0063BT3628
Gas LPG 30/31
Heat Input max 6.20 KW
Gas consumption 451 g/h
Injector 28-30/37mbar 1.16 mm / marking: BP
Injector (50mbar) 1.00 mm / marking: AP
Seitenbrenner
(available on the Auckland & Wellington
models)
CE 0063
Gas LPG 30/31
Heat Input max 3.80 KW
Gas consumption 276 g/h
Injector 28-30/37mbar 0.98 mm / marking: BK
Injector (50mbar) 0.85 mm / marking: AG
Darwin 3B
CE 0063BT3628
Gas LPG 30/31
Heat Input max 7.50 KW
Gas consumption 546 g/h
Injector 28-30/37mbar 0.78 mm / marking: BD
Injector (50mbar) 0.68 mm / marking: AD
Darwin 2B
CE 0063BT3628
Gas LPG 30/31
Heat Input max 6.80 KW
Gas consumption 494 g/h
Injector 28-30/37mbar 0.90 mm / marking: BM
Injector (50mbar) 0.80 mm / marking: AM
Categories
I3 DK, FI, NL, NO, SE, LU
B/P (30 mbar)
I3 CH, AT, DE
B/P (50 mbar)
I3 BE, CH, ES, FR, GB, IT, PT
+ (28/30/37 mbar)
Electronic ignition
Brisbane, Wellington, Auckland, Darwin 3B
Use Typ AA 1.5 Volt Batteries for the electronic igni-
tion.
Piezo ignition
Darwin 2B
No batteries required!
Information for temperature indicator:
A tolerance of +/– 10 % is possible.
OUTDOORCHEF operates a policy of continuous
product development and improvement. As such we
reserve the right to alter product design and or speci-
fication without giving any prior notice
THIS USER GUIDE SHOULD BE KEPT AND STORED
IN A PLACE THAT IS ACCESSIBLE AT ALL TIMES.