Table des Matières
Publicité
– Following information applies in member states of the European Union:
– Les informations suivantes sont destinées aux pays membres de l'Union Européenne:
– Die folgenden Hinweise gelten für Mitglieder der Europäischen Union:
– Las siguientes informaciones conciernen a los estados miembros de la Unión Europea:
– Le seguenti informazioni riguardano gli stati membri dell'Unione Europea:
English ----------------------------------------------------------------------------------------------------------------------
USER INFORMATION in accordance with "Directives 2002/95/EC and 2002/96/EC regarding the reduction of
hazardous substances in electrical and electronic equipment, including the disposal of waste".
The 'Not in the bin' symbol above when shown on equipment or packaging means that the equipment must, at the end
of its life, be disposed of separately from other waste.
The separate waste collection of such equipment is organised and managed by the manufacturer.
Users wishing to dispose of such equipment must contact the manufacturer and follow the prescribed guidelines for its
separate collection.
Appropriate waste separation, collection, environmentally compatible treatment and disposal is
intended to reduce harmful environmental effects and promote the reuse and recycling of materials contained in the
equipment.
Unlawful disposal of such equipment will be subject to the application of administrative sanctions provided by cur-
rent legislation.
Français ---------------------------------------------------------------------------------------------------------------------
INFORMATION POUR LES UTILISATEURS Aux termes des "Directives 2002/95/CE et 2002/96/CE relatives
à la réduction de l'utilisation de substances dangereuses dans les appareils électriques et électroniques ainsi
qu'à l'élimination des déchets"
Le symbole "poubelle barrée" apposé sur l'appareil ou sur son emballage indique que le produit, à la fin de sa vie utile,
doit être recueilli séparément des autres déchets.
La collecte sélective du présent appareil en fin de vie est organisée et gérée par le producteur. L'utilisateur qui voudra
se défaire du présent appareil devra par conséquent contacter le producteur et suivre le système que celui-ci a adopté
pour consentir la collecte séparée de l'appareil en fin de vie.
La collecte sélective adéquate pour l'envoi successif de l'appareil destiné au recyclage, au traitement et à l'élimination
compatible avec l'environnement contribue à éviter les effets négatifs possibles sur l'environnement et sur la santé et
favorise la réutilisation ou le recyclage des matériaux dont l'appareil est composé.
L'élimination abusive du produit par le détenteur comporte l'application des sanctions administratives prévues par les
lois en vigueur.
.53.
• Read this manual carefully before using MG2.
• Do not operate MG2 without the lid in place.
• Keep hands away from moving parts during operation.
• Disconnect MG2 from the power supply prior to maintenance operations.
• Use MG2 in a dust free environment, on a stable surface and always with the lid in place.
• As much as possible, avoid the ingress of environmental contamination, eg dust, into MG2.
• If located in a dusty environment, fit the protective cover when not in use.
• Do not insert sharp, hard or pointed objects (e.g. screwdrivers, rulers or knives) into the front aperture of MG2,
otherwise the print head may be irrevocably damaged.
• Ensure the support templates are kept clean and free of print and other residue.
• Ensure the carriage is kept clean.
• Do not attempt to change the height or thickness of the support templates as this may block MG2 or Irrevocably
damage the print head.
• Prior to printing, ensure the appropriate template is being used and the material is located correctly so that it
does not hinder the operation of MG2.
• Handle sheets of media with care and avoid touching the printable surface with the fingers.
• Before printing, check the printable surface is free of contamination, eg dirt, dust or grease and if necessary
clean using a soft cloth.
• Keep unused or partially used sheets of media in the original packaging and in a dry, clean place.
• When printing partially used sheets, ensure there are no protruding sprues, burrs along the sheared edges or tags
bent upwards, which may damage the print head.
• When printing partially used sheets, ensure the Jump function is used correctly to avoid printing non-existent
media, contaminating the support template and possibly causing irrevocable damage to the print head.
• Use only genuine Cembre/General Marking media, printer ribbons, spare parts and cleaning kits with MG2.
• We recommend cleaning the print head at each ribbon replacement, using only the genuine CLEANING KIT.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment
under FCC rules.
WARNINGS
.2.
Publicité
Table des Matières
