General Characteristics; Technical Specification - Cembre MG2 Notice D'utilisation

1. GENERAL CHARACTERISTICS

Markingenius MG2 has been exclusively designed by Cembre for the identification of conductors and electrical components.
Markingenius MG2 is a high resolution printer based on thermal transfer technology, capable of producing markers for
cables and terminal blocks, legends for pushbuttons and all electrical panel components. All Cembre MG media can be
printed with Windows True Type fonts in black or colours at high speed. Markingenius MG2 will also reproduce Clipart
images, drawings, barcodes and bitmaps down to very small sizes. Compact, ergonomic, clean and silent Markingenius
MG2 may be conveniently located in an office, like any other peripheral.
Each monochrome ribbon can print more than 300.000 MG-TPMF 4x10 mm cable tags with full printable surface coverage,
while printing times, costs and ribbon life may be further improved due to the ribbon optimisation system, depending on the
type of material being printed. Carriage loading and unloading operations are rapid; support templates are easily interchanged
and as the pigment deposited from the ribbon dries instantaneously, printed sheets are immediately ready to use.
Markingenius "MG2" package comprises (See FIG. 1 page 1):
 – MG2 thermal transfer printer.
 – Power supply cable.
– USB cable.

 – GENIUS operating software on "GENIUS SUITE" CD (including printer driver, user licence and manual).
 – MG2-PWC 991000 support template for MG-TPM cable tags.
– MG2-QTB 991011 support template only for MG-CPM-01, -02, -03, -04 and -07 terminal block markers.

(support template to print MG-CPM-03, -05, -06, -10, -12 and 13 terminal block markers, available separately).
 – MG2-PLT 991002 support template for flat media.
 – MG2-ETR 991600 black printer ribbon.
– MG2-CRB 991654 ribbon take up spool.

 – MG2-COV 991680 protective cover.
 – Operation and maintenance manual + software installation instruction + guarantee certificate.

2. TECHNICAL SPECIFICATION

– Printing mode: thermal transfer
– Supply voltage: 230 V 50 Hz - 115 V 60 Hz
– Operating current (230 V / 115 V): 0.6 A / 1.2 A
– Power consumption: 140 W
– Printing speed: 9 seconds per full sheet
– Maximum resolution: 300x300 or 300x600 DPI
– Connection: USB 1.1
– Operating temperature: + 15° to + 35° C
– Relative humidity: 30% to 80% without condensation
– Size: length 382 mm, width 230 mm, height 221 mm
– Weight: 9,6 kg
– Printable surface:
maximum width 110 mm - maximum length 140 mm
– Minimum system requirements:
PC with Pentium 4 (2,4 GHz) or equivalent
512 Mb RAM memory
2 Gb of available space on the hard disc
1024x768 SVGA monitor resolution.
Windows XP SP2, VISTA, 7 operating systems.
– Printer ribbon:
Internal diameter 28 mm - External diameter 53 mm - Width 120 mm
– Certification: CE marked in compliance with 2006/42/EC and 2004/108/EC European directives
.3.
NOTE
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
.52.