Operation; Before Initial Use - Dometic CFX28 Notice D'utilisation

Operation

Emergency switch (when fitted) and USB port (fig. 5, page 4)
Item Description
1 Emergency switch (when fitted)
2 Power supply for USB devices
7 Operation
7.1

Before initial use

I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (please also
refer to the chapter "Cleaning and maintenance" on page 23).
Reversing the lid opening direction (only CFX50W, CFX65W)
The lid hinges can be moved to the opposite side if you want to open the lid from the
opposite direction. To do this, proceed as follows:
➤ Open the lid and remove it (fig. 6 A, page 5).
➤ Remove the 3 screws per hinge (fig. 6 B, page 5) and take off hinges.
➤ Remove the plastic covers from the new hinge positions with a small screwdriver
and re-fit to the old hinge positions.
➤ Re-fit the hinges in new positions.
➤ Insert the lid in the hinges on the opposite side (fig. 6 C, page 5).
Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as
follows:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 4) twice.
➤ Use the "UP +" (fig. 3 7, page 4) or "DOWN –" (fig. 3 6, page 4) buttons to
select Celsius or Fahrenheit.
✔ The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
14
CFX28 – CFX65W
EN