Sportplus SP TM 4220E Mode D'emploi page 70

11. MAINTENANCE, CLEANING AND CARE
CHECKING THE TREADMILL FOR PROPER LUBRICATION
• Lift one side of the treadmill belt and feel the surface of the running board.
• If the surface feels moist (slippery), you do not need to lubricate.
• If the surface feels quite dry and/or if the device begins making unusual noises, you
should apply lubrication.
APPLYING LUBRICATION
• Lift one side of the treadmill belt.
• Apply/spray lubricant to the middle of the running board.
• Turn on the treadmill on the lowest speed level. Wait until the lubricant has been
distributed evenly beneath the belt.
• Note: Do not apply too much lubricant. Thoroughly wipe away any excess lubricant
from the sides of the belt. ATTENTION, SLIP HAZARD!
TREADMILL
SP-TM-4220E-IM-05-DE+GB+FR.indb 70
RUNNING BOARD
70
15/6/2016 18:46