Energy-Saving Feature; Turning Off - Sportplus SP TM 4220E Mode D'emploi

8. USING THE COMPUTER
BODY FAT MEASUREMENT
• Press the PROGRAM button to select the FAT body fat program. Then press the
MODE button to enter F-1, F-2, F-3, F-4, F-5 (F-1: GENDER, F-2: AGE, F-3: SIZE,
F-4: WEIGHT, F-5: BODY FAT).
• Use the SPEED + and SPEED - buttons to enter the settings for F-1 to F4.
• Then press the MODE button to calculate the body fat; to do so, hold the hand
sensor contacts with both hands. After 3 seconds, the display will show your body fat
quality index.
• The body fat quality index indicates the relation between your body height and body
weight. The FAT body fat measurement function is suitable for both men and women.
The ideal body fat ratio should be between 20 and 25. A value below 19 indicates
underweight. A value between 25 and 29 indicates overweight. A value above 30
indicates obesity. (The data are not medical information and are for reference only.)
F-1
F-2
F-3
F-4
F-5
F-5
F-5
F-5
SAFETY KEY FUNCTION
• When removing the safety key, the treadmill will switch off immediately. Once you
reattach the safety key to the computer, the treadmill is ready for use again.

ENERGY-SAVING FEATURE

• The system features an energy-saving function. When switched on, but without any
input for 10 minutes, the energy-saving function will be activated and the display will
turn off. In order to switch the device back on, press the main switch or remove and
reinsert the safety key.

TURNING OFF

• Turning off the power supply: You may at any time disconnect the power supply to
stop the treadmill. No damage will be caused.
SP-TM-4220E-IM-05-DE+GB+FR.indb 61
Gender 01 Male
Age 10------99
Size 100----200
Weight: 20-----150
BODY FAT ≤19
BODY FAT =(20---25)
BODY FAT =(26---29)
BODY FAT ≥30
61
02 Female
10------99
100----200
20-----150
Underweight
Normal weight
Overweight
Obesity
15/6/2016 18:46