Ptz Control - Velleman CCTVPROM10 Notice D'emploi

1) Modes: Click LIVE, PLAYBACK or SETUP.
2) Main Screen: Main display screen for live viewing and playback.
3) Time Stamp: Time stamp appears on each channel.
4) Channel: Channel number appears in the top left corner.
5) PTZ Control: PTZ control for any connected PTZ cameras (not included).
6) Functions: Click the icons to show/hide channels, take screen captures, and record.
7) Display Modes: Click the icons to view channels in single-channel full-screen, quad, and split-
screen configurations.
8) Volume/Mute: Select a channel (outlined in red) and then click the bars to increase/decrease
volume; click the icon to mute/un-mute volume.*
8.2.1 Live viewing
By default, remote surveillance opens in Live Viewing mode (split-screen).
To use Live Viewing:
1) Click LIVE at the top of the main screen.
2) Click the display mode icons to view the main screen in single-channel, quad, or split-screen
configurations. You can also double-click a channel at any time to view it in single-channel.
3) Click to show or hide all the channel windows.
4) Click to start/stop manual recording to your PC on ALL channels. For more details see
RECORDING.
5) Select a channel (outlined in red) and then click the audio bars to increase or decrease listen-in
volume*. Click the icon to mute/un-mute.
NOTE: The Talk function is not supported.
8.2.1.1 RECORDING
You can record video directly to your PC using the remote surveillance software.
To record video to your PC:
From Live viewing, click to start/stop manual recording to your PC on ALL channels
NOTES:
• You will record video to your PC regardless of the recording mode on the system itself.
• By default, recorded files are saved in C:\DVR\[ip_address]\Record.
8.2.1.2 SUB-MENU
Right-click any channel to open the sub-menu.
The sub-menu contains the following options:
• Open Window
• Close
• Open All
• Close All
• Start Record
• Stop

8.2.1.3 PTZ CONTROL

You must have a PTZ camera (not included) connected to the system in order to use the PTZ controls.
12/04/2011
CCTVPROM10
*Audio capable cameras (not included) required for audio listening and recording.
*Audio capable camera (not included) required for listen-in audio.
20
©Velleman nv